Chatillon

Chatillon CS-225 Digital Test StandCS Test Stand

CS-225 Digital Force Tester (225lb/1kN)

Limit testing to load, displacement or time Break testing – sharp or percentage Multi-stage, cyclic tests and height measurements

Advanced yet simple to use test setups

Limit testing (load, distance, time) - Break testing - Cyclic & loop testing
Multi-stage/User-defined testing
Height measurement

Advanced touch screen console
Simple operation: menus, template, prompts
Secure access - supervisor and operator levels 
Tabular and graphical results
Embedded SPC
Ergonomic design
Dust protected & splash proof touch screen
No computer required

PID closed-loop motion control
Precision position accuracy
Speed accuracy better than 1%

1000Hz data sampling and USB output
Save data to flash drive
Export data directly to Excel or OLE2 formats

Large working area
Ideal for large and small samples
T-slot table design supports custom fixturing

Barcode automatic operation

Dedicated at ±0.1% accuracy and Non-Dedicated at ±0.25%  accuracy - Load Cell range: 250g - 200lbs 

1 year warranty

 

 

Seperator

Chatillon CS-1100 Digital Force Tester

CS-1100 Digital Force Tester (1000lb/5kN)

Limit testing to load, displacement or time Break testing – sharp or percentage Multi-stage, cyclic tests and height measurements

Advanced yet simple to use test setups

Limit testing (load, distance, time) - Break testing - Cyclic & loop testing
Multi-stage/User-defined testing
Height measurement

Advanced touch screen console
Simple operation: menus, template, prompts
Secure access - supervisor and operator levels 
Tabular and graphical results
Embedded SPC
Ergonomic design
Dust protected & splash proof touch screen
No computer required

PID closed-loop motion control
Precision position accuracy
Speed accuracy better than 1%

1000Hz data sampling and USB output
Save data to flash drive
Export data directly to Excel or OLE2 formats

Large working area
Ideal for large and small samples
T-slot table design supports custom fixturing

Barcode automatic operation

Dedicated at ±0.1% accuracy and Non-Dedicated at ±0.25%  accuracy - Load Cell range: 250g - 1000lbs 

1 year warranty

Seperator

Chatillon LTCM100 Test Stand 

LTCM100 Series Motorized Test Stand (100lb/500N)

Tensile, Compression, Peel & Flexural Testing

Compact, Lightweight, Bench-top Design

Simple Operation
- Console Controls for Speed & Travel
- Optional Footswitch Remote Controller
- Independent Return Speed

- 0.2 - 20 in/min (5 - 500mm/min)

- 15 inches of travel

- 5 inch Throat depth

Mechanical Deflection Limits

Digital Load Limits (with Chatillon DF Series Gauge)

Large Working Area

2 Year Warranty

Seperator

Chatillon LTCM-500 Motorized Test Stand 

LTCM-500 Series Motorized Test Stand (500lb/2.5kN)

Tensile, Compression, Peel & Flexural Testing

Compact, Lightweight, Bench-top Design

Simple Operation
- Console Controls for Speed & Travel
- Optional Footswitch Remote Controller
- Independent Return Speed

- 0.2 - 20 in/min (5 - 500mm/min)

- 27 inches of travel

- 5 inch Throat depth

Mechanical Deflection Limits

Digital Load Limits (with Chatillon DF Series Gauge)

Large Working Area

2 Year Warranty

Seperator

Mark-10

Mark-10 ESM1500 Motorized Test Stand ESM1500 Video

ESM 1500 Motorized Test Stand (1500lb/6.7kN)

The ESM1500 is a highly configurable single-column force tester for tension and compression measurement applications up to 1,500 lbF (6.7 kN)

Compatible with Series 5i and 7i indicators and load cells, as well as 5 and 7 force gauges.

Sample setup and fine positioning are a breeze with available FollowMeTM force-based positioning - using your hand as your guide, push and pull on the load cell or force gauge to move the crosshead at a dynamically variable rate of speed.

Adjustable, removal controller with intuitive menu navigation

Password protection of test parameters

Stepper motor-driven, producing smooth and quiet operation with no speed variation under load

USB output of force vs. time or force vs. distance

Compact footprint, suitable for crowded workbenches

Ergonomic design, with smart, clean cable management

Most electronics housed in an integrated removable enclosure, easily removed and transported

All required communication cables included

3 Year Warranty

ESM1500 Control Panel

 ESM 1500

Seperator

Mark-10 ESM303 Motorized Test StandEMS303 Test Stand Video

ESM 303 Motorized Test Stand (300lbs/1.5kN)

The ESM303 is a highly configurable single-column force tester for tension and compression measurement applications up to 300 lbF (1.5 kN)

Compatible with Series 5i and 7i indicators and load cells, as well as Series 5 and 7 force gauges

Sample setup and fine positioning are a breeze with available FollowMeTM force-based positioning - using your hand as your guide, push and pull on the load cell or force gauge to move the crosshead at a dynamically variable rate of speed.

Satisfy various test methods through an easy-to-use menu, allowing the configuration of test speed, force and distance limits, cycling, preload and many other functions all protected by a password. Save up to 50 profiles to accommodate a range of test methods. 

Stepper motor-driven, producing smooth and quiet operation with no speed variation under load

USB output of force vs. time or force vs. distance

Compact footprint, suitable for crowded workbenches

Ergonomic design, with smart, clean cable management

Max travel: 18.0 in [457mm]

Travel resolution: 0.001 in [0.02mm]

Travel accuracy: ± 0.002in per 10in, [±0.05mm per 250mm 

3 Year Warranty

ESM1500 Control Panel

 ESM 1500

Seperator

                                                                 Series ESM303H Horizontal Test Stand

ESM303H Horizontal Test Stand

The ESM303H like the ESM303 is a highly configurable single-column force tester for tension and compression measurement applications up to 300 lbF (1.5 kN)

Compatible with Series 5i and 7i indicators and load cells, as well as Series 5 and 7 force gauges.

Sample setup and fine positioning are a breeze with available FollowMeTM force-based positioning - using your hand as your guide, push and pull on the load cell or force gauge to move the crosshead at a dynamically variable rate of speed.

Satisfy various test methods through an easy-to-use menu, allowing the configuration of test speed, force and distance limits, cycling, preload and many other functions all protected by a password. Save up to 50 profiles to accommodate a range of test methods. 

Stepper motor-driven, producing smooth and quiet operation with no speed variation under load

USB output of force vs. time or force vs. distance

Compact footprint, suitable for crowded workbenches

Ergonomic design, with smart, clean cable management

Max travel: 18.0 in [457mm]

Travel resolution: 0.001 in [0.02mm]

Travel accuracy: ± 0.002in per 10in, [±0.05mm per 250mm 

3 Year Warranty

Seperator

Mark-10 TSFM500-DC 

Series TSFM500-DC Test Stand 

Maximum force: 500 lbF [2,200 N]

Maximum travel: 4" [102 mm]

Speed range: 0.01 - 6 in/min [0.2 - 150 mm/min]

Speed accuracy: ±0.2% of setting, ±0% variation with load

Loading table with 25 #10-32 UNF holes for fixture mounting

Set of upper and lower adjustable solid state limit switches. Repeatable to within 0.001" [0.03 mm].

Universal power supply: 80-250 VAC

Manual travel knob

Mounting holes for bench mounting

Base may be removed for alternative mounting

3 Year Warranty

Mark-10 TSFM500H-DC 

Seperator

Mark-10 ESM301_ESM301L Test Stand 

Series ESM301 /ESM301L Test Stands (300lb/1.5kM) 

The stands can perform a wide range of tests, including:

Tensile and Compression testing, load holding, cycling, break test and limit testing

Selectable speed units of measurement (in/min & mm/min)

LCD display with UP, DOWN, STOP, and emergency stop buttons and variable function keys

Password protection of test parameters, to prevent unauthorized changes

Integrated travel limit switches

Removable fixture mounting plate with matrix of threaded holes

Stepper motor-driven, produces 0% speed variation with load

Maximum travel distance:
ESM301: 11.5 in (292 mm)
ESM301L: 18 in (457 mm)

Speed range:
Standard: 0.5 - 13 in/min (13 - 330 mm/min)
Optional: 0.02 - 45 in/min (0.5 - 1100 mm/min)

Mounting holes for bench mounting

Unique mechanical design significantly reduces column bending

Programmable UP and DOWN button functions - momentary motion, maintained motion, or auto

3 Year Warranty